Products
HF GAP Series
Product Description:
GAP new series of ink printing ink of polyester film (Polyester Film). PET and other polyester film adhesion and operating privileged.
Ink Type: polyester (Polyester) resin from the deployment of evaporative drying ink.
Purposes: the printing process, generally untreated or polyester film.
Appearance: are coated well, semi-gloss.
Transparency: transparency with the color, especially equipped with eight transparent color.
Coverage: 250 purpose screen printing, one kg ink can cover 30 square meters approximately.
Drying time: natural drying (20 ° C) about 20 minutes up to the appearance of dry. A large amount of solvent vapors such as the bad ventilation of the job shop, the drying process will be slower. Please note, such as dry and poor, and the residual solvent in the printed piece will lead to the undesirable phenomenon of ink adhesion. 50-60 ° C hot air drying 5-10 minutes is ideal.
Adhesion: good adhesion, adhesion with the surface of the print quality. Production before you try to print better. Good printing performance of the overlapping color inks.
Thinner: standard solvent T-977, slow solvent T-980, slow drying agent T-953, the Washout agent T-903.
: Neutral ink (medium) neutral ink of GAP-800, 800 neutral ink of GAP dull, GAP-850 semi-Levels printing tone mixture and so on. Such as adhesion difficulties enhancer D 5-10% of the weight added to the ink inside, you can improve the adhesion.
GAP new ink patch test results conditions of the project results to resistance to alcohol rubbing alcohol 60 times or more to pass the water resistance dip in tap water one week no unusual moisture resistance of 60 ° C × 90% relative humidity of 200 hours without abnormal resistance to punching and stamping the appropriateness of passing a pencil hardness of 45 ° x 200 grams of H heat (80 ° C × 1 hour) + (-20 ℃ × 1 hour) x 60 no unusual resistance to disruptive 70 ℃ × 6 hours 50 grams / square cm abnormal